Ready for Spills,
Reliable On-site
Built for performance. Trusted to protect. Oil-Dri® keeps safety and uptime intact—even through the toughest jobs and environments.
Application by Spill Type
Application by Environment
What Oil-Dri® tackles
Different spills call for different tools. From oil slicks to equipment leaks, we’ve got you covered.
Select a category
Petroleum Based Fluids
Chemical/Hazmat
Universal/General Maintenance
Grease & Lubricant
Food Processing
Outdoor/Stormwater
Paint & Coating
Petroleum Based Fluids
We’re called Oil-Dri® for a reason. Our absorbents tackle oil leaks fast—keeping repair shops, yards, and factory floors clean, safe, and ready
to roll.
Usual environments:
- Automotive repair
- Manufacturing
- Transport depots
- Heavy equipment yards
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Chemical or Hazmat
High-performance for high-risk cleanups. Our specialty absorbents contain and control hazardous spills to protect your team and facility.
Usual environments:
- Labs
- Warehouses
- Chemical processing
- Hazmat response
- Regulated sites
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Universal or General Maintenance
One product, countless messes. From routine drips to surprise leaks, our universal absorbents handle multiple fluids and surfaces—keeping your operation tidy and on track.
Usual environments:
- Facilities
- Schools
- Hospitals
- Warehouses
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Grease and Lubricant
Thick, slick, and tough to tackle. Grease and lubricant spills need heavy-duty absorbents that knock them out in one go.
Usual environments:
- Manufacturing
- Automotive
- Food service
- Industrial kitchens
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Food Processing
In food-handling, safety and sanitation are non-negotiable. Our food-safe absorbents manage spills quickly and hygienically—helping you maintain a clean, compliant operation.
Usual environments:
- Commercial kitchens
- Food and beverage plants
- Packaging and bottling lines
- Cold storage facilities
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Outdoor or Stormwater
When spills hit the open ground, speed matters. Our absorbents work fast to stop runoff, shielding drains and waterways from contamination.
Usual environments:
- Loading docks
- Construction sites
- Outdoor storage
- Municipal works
- Marine
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Paint and Coatings
Don’t let wet paint slow you down. Our absorbents lift spills fast to keep surfaces clear, crews moving, and downtime minimal.
Usual environments:
- Paint shops
- Paint shops
- Renovation sites
- Industrial finishing lines
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
What Oil-Dri® works
Different settings require different cleanup tools. From garages to factories, we’re there for you.
Select a category
Automotive
Industrial/Manufacturing
Food Processing
Hazmat/Emergency
Facilities/Maintenance
General Spill Control
Marine Environments
Automotive
Spills are part of the job, but you shouldn’t work in a hazard zone. Our absorbents keep shop floors dry, safe, and ready for whatever rolls in.
Usual spill types:
- Motor oil
- Transmission fluid
- Coolant/antifreeze
- Brake fluid
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Industrial or Manufacturing
Production doesn’t pause for spills. Oil-Dri® keeps leaks and drips off the floor—so lines keep running and teams stay safe.
Usual spill types:
- Hydraulic fluid
- Cutting oil
- Solvents
- Grease
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Food Processing
Clean, safe, and compliant—no exceptions. Oil-Dri® handles spills fast, so food preparation won’t be delayed, avoiding spoilage or contamination.
Usual spill types:
- Oils and fats
- Beverages and juices
- Syrups and sauces
- Dairy spills
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Hazmat or Emergency
Every second counts in situations like these. Oil-Dri® absorbents help you respond quickly to hazardous spills—protecting your people and property.
Usual spill types:
- Acids and bases
- Flammable liquids (solvents, fuels)
- Corrosives
- Biological materials
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Facilities or Maintenance
Everyday leaks and messes are expected, so we’ll help you come prepared. Oil-Dri® absorbents make cleanup quick and simple.
Usual spill types:
- Hydraulic fluids and lubricants
- Hydraulic fluids and lubricants
- Paint and solvents
- General-purpose spills (coffee, ink, light chemicals)
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
General Spill Control
For routine cleanups and surprise spills, Oil-Dri® absorbents keep you ready to manage any mess—quickly, safely, and with confidence.
Usual spill types:
- Oils and lubricants
- Water and coolants
- Light chemicals and detergents
- Food and beverage spills
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Marine Environments
Unpredictable waters call for reliable solutions. From dockside drips to on-deck spills, our absorbents handle cleanup fast—on calm lakes or in rough seas.
Usual spill types:
- Diesel fuel
- Hydraulic oil
- Bilge water
- Engine lubricants
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Chemical compatibility
We engineered our products to safely address a wide variety of spills.
CHEMICAL
UNIVERSAL
OIL ONLY
HAZ MAT
Clay
Acetaldehyde
Acetic Acid
Acetic Anhydride
Acetone
Acetyl Bromide
Acetyl Chloride
Acrolein
Frequently asked questions
Learn more about Oil-Dri® products and solutions.
What is Oil-Dri® granular absorbent made of?
Our granular absorbent products are 100% natural, kiln dried clay with no additives. These all natural porous minerals are frequently referred to as Fuller’s Earth. Oil-Dri® owns and operates clay mining & manufacturing facilities in several States in the U.S. See the manufacturing process here.
How do I use Oil-Dri® granular clay absorbents?
Cover the spill with Oil-Dri® and allow the granules to start absorbing. Work in with a stiff broom, shovel or shoe to allow all granules to come in contact with fluids. Add more product until all of the fluid has been absorbed. Once fluids are absorbed, you’re ready to clean it up for disposal.
Do Oil-Dri® granular clay absorbents have a shelf life?
If the packages are stored in a normal, dry or climate controlled environment, the material will last indefinitely. If left exposed to the environment or allowed to get wet, they may over time absorb humidity or fluid that contacts the material. This could inhibit the product’s effectiveness.
What is crystalline silica?
It is one of the most frequently occurring materials on earth and its most common form is sand. Trace amounts are present in Oil-Dri® clay.
What’s considered a “high level” of respirable crystalline silica?
Extremely dusty work environments, such as mineral processing, sandblasting, rock cutting, or concrete work, can expose workers to a high level of crystalline silica. Protecting these workers is the main focus of OSHA’s silica regulations. Typical spill clean up with Oil-Dri® on a warehouse floor does not raise issues with the regulation of silica dust.
Is Oil-Dri® absorbent clay safe for everyday use?
Yes. When Oil-Dri® is poured on a spill, only a negligible amount of dust is created and just a fraction of that dust contains crystalline silica. We have conducted tests to calculate average dust exposure and have found that a worker using clay absorbents over an 8 hour shift would be exposed to less than 1/4000 of the OSHA permissible limit. In short, the OSHA regulation does not apply to the normal use of clay absorbents in the workplace.
Why is there a warning label on a bag of Oil-Dri® granular absorbent?
It’s the law! U.S. manufacturers are required to disclose (through labeling) the presence of crystalline silica in industrial products. All Oil- Dri® products have been thoroughly tested and have been determined to be completely safe for their intended uses, as people have been safely using clay-based floor absorbent for decades.
What is melt blown polypropylene?
Simply put, melt blown is an absorbent material made by melting polypropylene resins which are turned into fibrous strands and blown onto a conveyer to form an absorbent material that will hold 12-20 times it’s weight in fluid.
Why the different colors in polypropylene absorbents?
A color coded system was developed by the industry to better understand the waste stream. Yellow sorbents are used for hazardous fluids to indicate caution when disposing. White sorbents will only absorb petroleum based fluids. Gray universal sorbents can be used on all fluids.
What is the white material used for?
White sorbents are hydrophobic and will only absorb petroleum based fluids while repelling water. Great for oil spills, outdoor use, and absorbing floating oil on the surface of water.
What is the yellow material used for?
Yellow sorbents are highly visible and used for hazardous fluids to indicate caution when disposing.
What is the gray material used for?
Gray sorbents are for universal applications can be used to absorb all fluids.
What are spill kits?
A spill kit is a pre-packaged collection of absorbent materials kept readily available to anticipate unexpected leaks and spills that may occur in your facility. Available in many sizes and configurations, these kits should be part of every spill control plan. In certain facilities, these kits may be required to comply with regulations.
What is sweeping compound?
Sweeping Compound is a moist compound that is pushed in front of a broom while sweeping to prevent dust from becoming airborne and resettling, reducing the inhalation of irritable dust while sweeping.
How do I dispose of Oil-Dri® absorbents?
Oil-Dri® does not give recommendations for disposing of used material as disposal requirements vary from state to state by the type of fluid that has been absorbed. Contact officials in your municipality or the local or state offices of the EPA for proper disposal procedures. See back cover for regulatory contact information.
Where can I buy Oil-Dri® products?
As a manufacturer, Oil-Dri® has a strong policy to sell directly to distributors and retailers for resale purposes only. For information on becoming an Oil-Dri® distributor, or to find an Oil-Dri® distributor or retailer in your area, please call Customer Service at 800-645-3747.
Did you know?
- The Bureau of Labor Statistics reports that slips, trips and falls at the same level (falls that are not from an elevated height) are the leading cause of OSHA- recordable injuries, racking up over 152,000 lost work days every year and make up almost 20% of all job-related injuries.
- The average cost of a single slip, trip and fall injury is more than $20,000.
1 in 6 of all lost-time work injuries result from slips, trips and falls with an average of 11 days away from work. - Slips, trips and falls account for 15 to 20% of all workers’ compensation expenses.
- US businesses spend over $36 billion a year in workers’ comp, insurance premiums and lost productivity.
- 20 – 30% of people who slip and fall will suffer moderate to severe injuries such as bruises, hip fractures or head injuries.
- According to OSHA, slips, trips and falls cause 15% of all accidental deaths and are second only to motor vehicles.
- OSHA estimates that over six million facilities in the US are regulated under their Subpart D Standards, which require workplace floors to be ‘maintained in a clean and, so far as possible, a dry condition’ (29 CFR 1910.22).
Let’s handle the mess head on
From picking the right products to expert support, we’re here to help you get the job done right.